Overview
PawPrint is a "print & release" system which allows you to retrieve your printed documents from any PawPrint enabled device on campus by simply swiping your ID card or logging in with your network username and password. You can add the PawPrint queue to your MacOS device quickly if you are connected to the PCT or PCT-New network by selecting Add Printer or Scanner from within the Printers & Scanners menu in System Settings.
Instructions
Skip to Step 7 if you are having issues printing.
Step 1.
Open the System Settings application. If it is not on your dock, it can be found in Spotlight.
Step 2.
Click the Wi-Fi icon. Then click Details on the PCT-New Wi-Fi.
Step 3.
Turn Off 'Limit IP Address tracking'. Then click OK.
Step 4.
After Clicking OK, Select Printers & Scanners on the bottom of the sidebar. Then click Add Printer, Scanner, or Fax.
Step 5.
Select pawprint in the printer selection. It may be located on the bottom of the printer list.
You will need to send a print job to pawprint to enter credentials.
Step 6.
When printing for the first time, you will be asked for your PCT credentials. The Name field is your PCT email.
Make sure to check the check box to remember credentials.
Step 7.
Monitor the print icon in the dock. It will disappear if the credentials are correct. If not, click on it to open the Print Queue and proceed to Step 8.
Step 8. (Follow this step if your print job is not printing)
The print queue will say 'Hold for Authentication' if the credentials are incorrect or are not saved from the previous print.
After opening the print queue, click on the lock icon with the loop arrow around it. Then follow Step 6.
